Get Adobe Flash Player
HomeSite MapContact Us
Home Sitemap Contact Us

  
Products
CNC Cutting Machines
Robotic Waterjet Cutting Machine
 

CNC Water Jet Cutting Machine

• Home »  Products » CNC Cutting Machines • CNC Water Jet Cutting Machine

The company deals in high performing CNC water jet cutting machine in the national as well as international market. Our wide range of water jet cutting machine use cold supersonic abrasive erosion to cut any substance whether it may be metal or non metal. The highly pressurized water stream is forced through a small area to erode away the material. Besides, we are reckoned as one of the most prominent water jet pumps exporters in India. The mentioned below are some of the advantages that our water jet pumps offer :
  • Cold cutting without thermal influences
  • Flexible processing of virtually all materials with consistent high quality.
  • Material-saving production due to reduced cutting width and the nesting of several parts on a single sheet.
  • Maximum degree of material utilization due to the smallest of part separation distances (partially free of burrs) and part–in-part production.
  • Tension-free processed parts due to minimal cutting force.
  • Environmentally friendly and clean production without poisonous gases.
  • Good access to the work area of the Waterjet system
  • Optimization of the cutting parameters to meet individual requirements.
  • Close linking with the CAD/CAM programming system.
  • High material savings due to narrow bridges or ribs
  • No tool manufacturing and tool storage cost.
  • High productivity through multi head cutting systems and multilayer cutting.
  • High –performance drive system, which permits high-precision production of parts as well as the highest of processing speeds.
  • The combined production using Waterjet cutting machines and milling centers guarantees economical processing. The parts can be prefabricated and nested and only high precision areas are post worked.
  • Fast setup and rapid programming.
  • Minimal requirement of fixture.

To enquire about the desired product(s), just check the box and then click “Inquiry Now” button which is provided below.

 

DWJ1525 - BB
(DWJ1525 - BB)
Zoom

  • Structure : Bridge Structure
  • Cutting table size (X x Y) : 1600 x 2600mm
  • Travel of X axis : 1500mm
  • Travel of Y axis : 2500mm
  • Travel of Z axis: 210 mm
  • NC system- : Huaxin 320W
  • Drive : A .C. Servo Drive (Japan YASKAWA)
  • Traverse Speed : 0-15 m/min
  • Power supply : 415VAC, 50Hz, 3 Phase (Standard) (or) as per your purchase order
  • New Cam Software (1 set)
    • Auto- transforming DXF files into CNC program.
    • Communication between PC and CNC through serial interface
    • Open database can save the cutting parameters of different materials. Without inputting the parameters again, you can use them in your CNC programs only by a mouse click.
  • Motorized Z axis
  • Welded Grid net, easy to replace

 

DWJ1530 - BB
(DWJ1530 - BB)
Zoom

  • Structure : Bridge Structure
  • Cutting table size (X x Y) : 1600 x 3100mm
  • Travel of X axis : 1500mm
  • Travel of Y axis : 3000mm
  • Travel of Z axis : 210 mm
  • NC system- : Huaxin 320W
  • Drive : A .C. Servo Drive (Japan YASAKAWA)
  • Traverse Speed : 0-15 m/min
  • Power supply: 415VAC, 50Hz, 3 Phase (Standard) (or) as per your purchase order
  • New Cam Software (1 set)
    • Auto- transforming DXF files into CNC program.
    • Communication between PC and CNC through serial interface
    • Open database can save the cutting parameters of different materials. Without inputting the parameters again, you can use them in your CNC programs only by a mouse click.
  • Motorized Z axis
  • Welded Grid net, easy to replace

 

DWJ3020 - BB
(DWJ3020 - BB)
Zoom

  • CNC x-y cutting table
  • Structure : Bridge Structure
  • Cutting table size (X x Y) : 3170 x 2130mm
  • Travel of X axis : 3000mm
  • Travel of Y axis : 1800mm
  • Travel of Z axis : 210 mm
  • NC system : Huaxin 320W
  • Drive : A .C. Servo Drive
  • Traverse Speed : 0-15 m/min
  • Power supply: 415VAC, 50Hz, 3 Phase (Standard) (or) as per your purchase order
  • New Cam Software (1 set)
    • Auto- transforming DXF files into CNC program.
    • Communication between PC and CNC through serial interface
    • Open database can save the cutting parameters of different materials. Without inputting the parameters again, you can use them in your CNC programs only by a mouse click.
  • Motorized Z axis
  • Welded Grid net, easy to replace

 

DWJ3040 - BB
(DWJ3040 - BB)
Zoom

  • CNC x-y cutting table
  • Structure : Bridge Structure
  • Cutting table size (X x Y): 3170 x 4130mm
  • Travel of X axis : 3000mm
  • Travel of Y axis : 4000mm
  • Travel of Z axis : 210mm
  • NC system- : Huaxin 320W
  • Drive : A.C. Servo Drive
  • Traverse Speed : 0-15 m/min
  • Power supply : 415VAC, 50Hz, 3 Phase (Standard) (or) as per your purchase order
  • New Cam Software (1 set)
    • Auto- transforming DXF files into CNC program.
    • Communication between PC and CNC through serial interface
    • Open database can save the cutting parameters of different materials. Without inputting the parameters again, you can use them in your CNC programs only by a mouse click.
  • Motorized Z axis
  • Welded Grid net, easy to replace

 

DWJ3060 - BB
(DWJ3060 - BB)
Zoom

  • CNC x-y cutting table
  • Structure : Bridge Structure
  • Cutting table size (X x Y) : 3170 x 6130mm
  • Travel of X axis : 3000mm
  • Travel of Y axis : 6000mm
  • Travel of Z axis : 210 mm
  • NC system : Huaxin 320W
  • Drive : A .C. Servo Drive
  • Traverse Speed : 0-15 m/min
  • Power supply: 415VAC, 50Hz, 3 Phase (Standard) (or) as per your purchase order
  • New Cam Software (1 set)
    • Auto- transforming DXF files into CNC program.
    • Communication between PC and CNC through serial interface
    • Open database can save the cutting parameters of different materials. Without inputting the parameters again, you can use them in your CNC programs only by a mouse click.
  • Motorized Z axis
  • Welded Grid net, easy to replace

 

DWJ3080 - BB
(DWJ3080 - BB)
Zoom

  • CNC x-y cutting table
  • Structure : Bridge Structure
  • Cutting table size (X x Y) : 3170 x 8130mm
  • Travel of X axis : 3000mm
  • Travel of Y axis : 6000mm
  • Travel of Z axis : 210 mm
  • NC system : Huaxin 320W
  • Drive : A .C. Servo Drive
  • Traverse Speed : 0-15 m/min
  • Power supply: 415VAC, 50Hz, 3 Phase (Standard) (or) as per your purchase order
  • New Cam Software (1 set)
    • Auto- transforming DXF files into CNC program.
    • Communication between PC and CNC through serial interface
    • Open database can save the cutting parameters of different materials. Without inputting the parameters again, you can use them in your CNC programs only by a mouse click.
  • Motorized Z axis
  • Welded Grid net, easy to replace

 

DIPS6 - 2230
(DIPS6 - 2230)
Zoom

  • High Pressure
  • Max. Output pressure : 40000 psi (300mpa)
  • Pressure Intensification ratio : 24:1
  • Max. Flow rate : 3.1 lpm
  • Inlet water pressure : 0.4 mpa (For Intensifier)
  • Main motor power : 22kw / 30HP
  • Voltage : 415 VAC, 50Hz, 3 Phase (Standard)
  • Inlet Water pressure for heat exchanger : 0.8 mpa
  • Oil Recycling : 52 liters/min.
  • Intensifier completely made by Dardi Water Cutter Co. Ltd. China.
  • Integral Inlet water filters (5Micron, 1micron, 0.45micron in series)
  • Working hour counter
  • Special tool kit for maintenance / repair
  • Arbitrarily hands adjusting working pressure
  • Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection.
  • Dimensions :(Approximately)
    • Length – 1670mm
    • Width - 920mm
    • Height – 1180mm

 

DIPS9-3040
(DIPS9-3040)
Zoom

  • Max. Output pressure : 55000 psi (380 mpa)
  • Pressure Intensification ratio : 20:1
  • Max. Flow rate : 3.7 lpm
  • Inlet water pressure : 0.4 mpa (For Intensifier)
  • Main motor power : 30kw / 40HP
  • Voltage : 415 VAC, 50Hz, 3 Phase (Standard)
  • Inlet Water pressure for heat exchanger : 0.8 mpa
  • Oil Recycling : 69 liters/min.
  • Main parts of intensifier imported from abroad (High-pressure (HP) cylinder, plunger, HP seals, HP tube)
  • Integral Inlet water filters (5Micron, 1micron, 0.45micron in series)
  • Working hour counter
  • Special tool kit for maintenance / repair
  • Arbitrarily hands adjusting working pressure
  • Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection
  • Dimensions : (Approximately)
    • Length – 1700mm
    • Width - 1000mm
    • Height – 1200mm

 

DIPS7 - 3740
(DIPS7 - 3740)
Zoom

  • High Pressure
  • Max. Output pressure : 60000 psi (400 mpa)
  • Pressure Intensification ratio : 20:1
  • Max. Flow rate : 3.7 lpm
  • Inlet water pressure : 0. 4 mpa (For Intensifier)
  • Main motor power : 37kw / 50HP
  • Voltage : 415 VAC, 50Hz, 3 Phase (Standard)
  • Inlet Water pressure for heat exchanger : 0.8 mpa
  • Oil Recycling : 86 liters/min.
  • Intensifier imported from abroad
  • Integral Inlet water filters (5Micron, 1micron, 0.45micron in series)
  • Working hour counter
  • Special tool kit for maintenance / repair
  • Arbitrarily hands adjusting working pressure
  • Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection
  • Dimensions : (Approximately)
    • Length – 1700mm
    • Width - 1500mm
    • Height – 1400mm

 

Jetline JL-1
(Jetline JL-1)
Zoom

  • Max. Output Pressure : 55000 psi (380 mpa)
  • Max. Flow Rate : 2.3 lpm
  • Inlet water pressure: 0. 4 mpa (For Intensifier)
  • Main Motor Power : 22 kw/ 30HP
  • Voltage : 415 VAC, 50Hz, 3 Phase (Standard)
  • Inlet Water pressure for heat exchanger : 0.8 mpa
  • Working hour counter
  • Special tool kit for maintenance / repair
  • Arbitrarily hands adjusting working pressure
  • Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection
  • Dimensions : (Approximately)
    Length – 1778 mm
    Width - 914 mm
    Height – 1194 mm

 

SL-V-30 Classic
(SL-V-30 Classic)
Zoom

KMT StreamlineTM SL-V-30 Classic

  • Max. Output Pressure : 55000 psi (380 mpa)
  • Max. Flow Rate : 2.3 lpm
  • Inlet Water Pressure : 0. 4 mpa (For Intensifier)
  • Main Motor Power : 22 kw/ 30HP
  • Voltage : 415 VAC, 50Hz, 3 Phase (Standard)
  • Inlet Water pressure for heat exchanger : 0.8 mpa
  • Working hour counter
  • Special tool kit for maintenance / repair
  • Arbitrarily hands adjusting working pressure
  • Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection
  • Dimensions : (Approximately)
    Length – 1727 mm
    Width - 914 mm
    Height – 1203 mm

 

SL-V-50 Classic
(SL-V-50 Classic)
Zoom

KMT StreamlineTM SL-V E-50 CLASSIC

  • Max. Output Pressure : 55000 psi (380 mpa)
  • Max. Flow Rate : 3.8 lpm
  • Inlet Water Pressure : 0. 4 mpa (For Intensifier)
  • Main Motor Power : 37kw / 50HP
  • Voltage : 415 VAC, 50Hz, 3 Phase (Standard)
  • Inlet Water pressure for heat exchanger : 0.8 mpa
  • Working hour counter
  • Special tool kit for maintenance / repair
  • Arbitrarily hands adjusting working pressure
  • Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection
  • Dimensions : (Approximately)
    Length – 1727 mm
    Width - 914 mm
    Height – 1203 mm

 



Select and click   Select All   |   Clear All  

<< Previous   1   2   3 Next >>
Select Language : English French German Italian Portuguese Spanish  

Home | Site Map | Company Profile | Products | About Us | Working Process | Corporate Social Responsibilities | FAQ | Support | Comparison | Achievements | Understand Models Name | Our Service | Contact Us

India Business Directory - B2B Network of ExportersIndia.com
© Copyright 2009 - 2010. A Innovative International Ltd., Content Copyright Rights Reserved