CNC Water Jet Cutting Machine
Please Install Flash Player
Download from here
  

DIPS9-3040

Home » Products » CNC Water Jet Cutting Machine » DIPS9-3040
  • Max. Output pressure : 55000 psi (380 mpa)

  • Pressure Intensification ratio : 20:1

  • Max. Flow rate : 3.7 lpm

  • Inlet water pressure : 0.4 mpa (For Intensifier)

  • Main motor power : 30kw / 40HP

  • Voltage : 415 VAC, 50Hz, 3 Phase (Standard)

  • Inlet Water pressure for heat exchanger : 0.8 mpa

  • Oil Recycling : 69 liters/min.

  • Main parts of intensifier imported from abroad (High-pressure (HP) cylinder, plunger, HP seals, HP tube)

  • Integral Inlet water filters (5Micron, 1micron, 0.45micron in series)

  • Working hour counter

  • Special tool kit for maintenance / repair

  • Arbitrarily hands adjusting working pressure

  • Automatically shut down (Trip Off) in case of super pressure of oil or low pressure of water for protection

  • Dimensions : (Approximately)
    • Length – 1700mm

    • Width - 1000mm

    • Height – 1200mm



 

ENQUIRY FORM
  Enquiry Form * fields are mendatory  
Contact Person *  
Company Name  
Address  
Email *  
Country *  
Phone *  
Mobile No.  
Fax  
Subject  
Enquiry Details *  
Verification Code *     Reload Image
   


Choose your language:   English   Espanol   Francis   Deutsch   Italy   Portugues