Waterjet Accessories

Product Details :

• Stone & Ceramic Industry
• Increases production by making negative angle in stone and ceramic inlay
• Increases product precision by virtually eliminating taper

Product Details :

• Every Abrasive Waterjet Cutting Machine needs clearing to remove used abrasive from the catcher tank on regular intervals.
• A machine has to be shut down during this process resulting into loss of production.
• It is very difficult and risky to remove the sticky sludge manually as sharp edges of scrap can injure the person
• Due to metals scrap and other debris shevelling is also difficult.
• Our abrasive removal pump can be integrated with our Machine CNC to program it for scheduled ON & OFF cycles
• The sludge will be delivered via flexible pipe & can be separated via cloth filter bag. Thus water can be regained into the catcher tank.
• This entire system increases the uptime of the machine & saves money of manual removal.

Product Details :

• For efficient production processes, the level of abrasive in the abrasive hopper of the machine must be constantly monitored to ensure that it does not drop below a minimum level. SMARTFEED ensures that there is always sufficient abrasive available for the cutting process. This prevents problems like accidental cutting without abrasive thus improves quality and saves time & money. SMARTFEED guarantees process safety and excellent stability in all waterjet cutting processes
• It has the capability of storing abrasive and delivers the abrasive to the abrasive hopper on machine, automatically. The design shows our continuous effort to improve efficiency and reduce labor requirement.
• High sensitive sensor which monitors the available abrasive; gives visual indication to the operator when the storage tank is to be refilled
• With 200 liters abrasive storage capacity, the abrasive can be directly feed-in to the abrasive hopper for continuous operation of 300 to 900 minutes (10 to 15 hours). [Higher capacity are available please request for a quote]

Waterjet + Plasma 2 in 1 Combination

• Waterjet for accuracy and finishing
• Plasma for the edges on which higher accuracies are not required
• Get Higher Output
• Save space, as factory space is very expensive
• Good if you have jobshop as it gives flexibility in taking jobs
• You can reduce overall cost of profile cutting
• Huge savings on machine investments, 2 machines can be replaced by 1
• Single software is used for both technology, easy to manage
• Only one operator required

Features

You can use single CAM Software with the graphical interface which will let you select the path to be cut by different technologies. Display is in different colors to indicate which paths will be cut by both technology.

Bevel Cutting Head

• NC Controlled Bevel angle can be programmed in the controller
• Motorized Bevel angle can be adjusted with the push of a button and the value will be displayed on the screen
• Manual Bevel angle can be adjusted by rotating calibrated handwheel